ZYTEL HTN

Zytel® HTN High performance polyamide bridges the gap between engineering and high performance speciality polymers.

Zytel® HTN is modified to withstand extreme conditions such as long term exposure to heat, chemicals, and moisture. Compared to standard nylon technologies (PA6 / PA6.6) HTN can offer improved dimensional stability due lower moisture absorbsion.

Additional product information
Find out more by clicking the headings below to expand each section
Product range
  • Glass fibre reinforced (15%-60%)
  • Unreinforced
  • Flame retardant & non-halogenated
  • Heat stabilised
  • Lubricated
  • Toughened
  • Food approved
  • Hydrolysis resistant
  • Low wear & friction
  • Low warp
  • EF Friendly


Zytel® HTN 51 Series

  • Outstanding retention of properties with moisture
  • Improved dimensional stability
  • Retains key properties up to 140°C
  • Requires oil heated tools


Zytel® HTN 52 Series

  • Highest melting point of 310°C
  • Improved dimensional stability with moisture
  • Requires water heated tools


Zytel® HTN 53 Series

  • Highest stiffness & strength
  • Good toughness
  • Excellent surface finish
  • Requires water heated tools


Zytel® HTN 54 Series

  • High burst pressure & weldline strength
  • Retention of properties with moisture
  • High level of stiffness up to 110°C
  • Improved chemical resistance over the 53 series
  • Requires water heated tools


Zytel® HTN 92 series

  • Enhanced with DuPont™ SHIELD Technology
  • High performance at temperatures up to 230°C
Advantages
  • Stiffness
  • Property retention with moisture content
  • High service temperature (150°C-200°C)
  • Creep resistance
  • Chemical resistance
  • Dimensionally stable
Typical applications
  • Charge air cooler
  • Water jacket spacer
  • Air suspension module
  • Under the hood parts
  • High temperature water surge tank
  • Connectors
  • Mobile phone backbone
  • Domestic heaters
  • Transformer bushings
Product availability
  • United Kingdom
  • Ireland
  • Denmark
  • Finland
  • Norway
  • Sweden
Processing
  • Injection Moulding
ZYTEL HTN

Useful information

Select a resource from the drop down to find out more:

Find the product data you need

Looking for Datasheets & UL Yellow Cards?

Select the grade from the below list.

Grades
Compare grades
Additional product information
Find out more by clicking the headings below to expand each section
Product range
  • Glass fibre reinforced (15%-60%)
  • Unreinforced
  • Flame retardant & non-halogenated
  • Heat stabilised
  • Lubricated
  • Toughened
  • Food approved
  • Hydrolysis resistant
  • Low wear & friction
  • Low warp
  • EF Friendly


Zytel® HTN 51 Series

  • Outstanding retention of properties with moisture
  • Improved dimensional stability
  • Retains key properties up to 140°C
  • Requires oil heated tools


Zytel® HTN 52 Series

  • Highest melting point of 310°C
  • Improved dimensional stability with moisture
  • Requires water heated tools


Zytel® HTN 53 Series

  • Highest stiffness & strength
  • Good toughness
  • Excellent surface finish
  • Requires water heated tools


Zytel® HTN 54 Series

  • High burst pressure & weldline strength
  • Retention of properties with moisture
  • High level of stiffness up to 110°C
  • Improved chemical resistance over the 53 series
  • Requires water heated tools


Zytel® HTN 92 series

  • Enhanced with DuPont™ SHIELD Technology
  • High performance at temperatures up to 230°C
Advantages
  • Stiffness
  • Property retention with moisture content
  • High service temperature (150°C-200°C)
  • Creep resistance
  • Chemical resistance
  • Dimensionally stable
Typical applications
  • Charge air cooler
  • Water jacket spacer
  • Air suspension module
  • Under the hood parts
  • High temperature water surge tank
  • Connectors
  • Mobile phone backbone
  • Domestic heaters
  • Transformer bushings
Product availability
  • United Kingdom
  • Ireland
  • Denmark
  • Finland
  • Norway
  • Sweden
Processing
  • Injection Moulding